Skip to main content
WAYTO TRADE CO., LIMITED logo

How to Choose Chemical Protective Coveralls

Chemical protective coveralls are the last barrier between a worker and a hazardous liquid or dust. Pick the wrong type and the suit can fail at exactly the moment it is needed — the chemical soaks through, or dust finds its way inside. This guide explains the protection types, the difference between the two main materials, and the questions to ask before you order.

The six protection types

Coveralls are classified by the kind of exposure they protect against. The European system uses six types, and the number is not a ranking — each type covers a different hazard:

  • Type 1 — gas-tight suits for the highest hazard, fully encapsulating (EN 943).
  • Type 2 — non-gas-tight suits for gas and vapour where a gas-tight suit is not required (EN 943).
  • Type 3 — liquid-tight: protects against a jet of liquid (EN 14605).
  • Type 4 — spray-tight: protects against a spray of liquid (EN 14605).
  • Type 5 — protects against airborne solid particles, such as dusts and fibres (EN ISO 13982-1).
  • Type 6 — protects against a light spray or splash of liquid (EN 13034).

Most industrial chemical work is covered by Types 3 to 6. A suit rated Type 6 only is not a substitute for a Type 3 suit when liquid jets are possible, and a Type 5 dust suit does not protect against liquid chemicals.

Tychem vs Tyvek: two different materials

Two DuPont materials dominate this market, and they are built for different jobs.

Tyvek is a flash-spun polyethylene fabric. It is light, strong against dry particles, and comfortable enough for physical work — the standard choice for dust, fibres and light liquid splash. Tyvek coveralls are typically certified to Type 5 and Type 6.

Tychem is a multi-layer barrier laminate: a film barrier bonded to a fabric base. It resists liquid chemicals rather than just particles, and Tychem coveralls are certified across Types 3, 4, 5 and 6. The DuPont Tychem 2000 C, for example, is a hooded coverall certified to Type 3, 4, 5 and 6 protection — the suit to reach for when liquid chemicals are being sprayed or splashed.

Rule of thumb: dust and dry particles — Tyvek. Liquid chemicals — Tychem. If the job involves both, the chemical risk decides. Browse the full range in our protective clothing category or the DuPont brand page.

Match the suit to the job

Before choosing a model, answer four questions:

  1. What chemical is involved? Name it and its concentration — protection depends on the exact chemical, not on a general category.
  2. How does it reach the worker? A jet, a spray, a splash, or dust in the air — each points to a different type.
  3. How long is the exposure? A quick task and a full shift in the suit are different decisions.
  4. What else is worn with it? Respirator, gloves and boots must work with the suit — cuffs over gloves, hood over the respirator, and taped seams where the risk justifies it.

Ask the supplier for the chemical permeation data for your exact chemical. Breakthrough time — how long it takes a chemical to pass through the material — is specific to each chemical and material combination. Never assume a suit that holds back one chemical will hold back another.

Fit, sizing and wearing

A coverall that does not fit does not protect. Too tight and the seams are stressed and the fabric can tear; too loose and loose fabric catches on equipment. Check the size chart against body measurements, not against normal clothing sizes. Look for elasticated cuffs, a fitted hood and thumb loops that keep the sleeves in place when the wearer reaches overhead. Put the suit on before the gloves and respirator, and check the zip, cuffs and hood before starting work. Chemical coveralls are single-use items: once contaminated, take the suit off without touching the outside, and dispose of it as hazardous waste where the rules require it.

What to ask your supplier

  • Which protection types is this suit certified to?
  • What sizes are available, and is there a size chart?
  • Can you provide permeation data for the chemical we use?
  • How is it packed — individually or in bulk?
  • What is the lead time for our quantity?

Need a quotation? Tell us the product, the quantity and the destination country, and we will come back with a clear price. Send an inquiry or message us on WhatsApp.

Frequently asked questions

What is the difference between Tyvek and Tychem coveralls?
Tyvek is a flash-spun polyethylene fabric: light, strong against dry particles, and the standard choice for dust, fibres and light liquid splash; Tyvek coveralls are typically certified to Type 5 and Type 6. Tychem is a multi-layer barrier laminate that resists liquid chemicals rather than just particles, and Tychem coveralls are certified across Types 3, 4, 5 and 6. Rule of thumb: dust and dry particles — Tyvek; liquid chemicals — Tychem.
What does a Type 3 coverall protect against, and how is it different from Type 6?
Type 3 is liquid-tight: it protects against a jet of liquid (EN 14605). Type 6 protects against a light spray or splash of liquid (EN 13034). A suit rated Type 6 only is not a substitute for a Type 3 suit when liquid jets are possible, and a Type 5 dust suit does not protect against liquid chemicals.
Are chemical coveralls reusable?
No. Chemical coveralls are single-use items: once contaminated, take the suit off without touching the outside, and dispose of it as hazardous waste where the rules require it.
What should I ask a supplier before ordering chemical coveralls?
Which protection types the suit is certified to, what sizes are available and whether there is a size chart, whether permeation data is available for the chemical you use, how the suits are packed, and what the lead time is for your quantity.

Contact WAYTO TRADE CO., LIMITED by email at wttsafety@gmail.com or on WhatsApp at +86 186 0601 6519.