N95 vs FFP2 vs KN95: What's the Difference?
N95, FFP2 and KN95 are the three mask ratings buyers ask for most — and the three most confused. They come from three different standards, three different markets, and similar-sounding numbers that do not mean the same thing. This guide compares them side by side so you can ask for the right one.
The three standards at a glance
| Rating | Standard | Region | Minimum filtration | Test aerosol | Oil resistance |
|---|---|---|---|---|---|
| N95 | NIOSH 42 CFR 84 | United States | ≥95% | Sodium chloride, 0.3 µm | No — N means not resistant to oil |
| FFP2 | EN 149:2001+A1:2009 | European Union | ≥94% | Sodium chloride and paraffin oil | Tested against oil mist |
| KN95 | GB 2626-2019 | China | ≥95% | Sodium chloride, 0.3 µm | KN = non-oil version |
Two more differences matter. FFP2 also limits total inward leakage — no more than 8% of air may leak in around the seal — while N95 and KN95 rely on fit testing and user seal checks to control leakage. And the letters after the number describe oil resistance, not quality: N95, R95 and P95 filter equally well against dust; P95 is also oil-proof, R95 partly so.
So which one should you buy?
Buy the version certified for the market where the mask will be used. For the United States, ask for a NIOSH-approved N95. For the European Union, a CE-marked FFP2. For China, a GB 2626 KN95. Similar filtration does not make them interchangeable — the approval, the marking and the test method are all different, and a buyer whose local rules require one of them cannot substitute another.
China-market versions are different products
3M masks are made in market-specific versions. The 3M 8210CN, for example, is the China-market N95 disposable respirator for dust and non-oil airborne particles — it is not the same listing as the US 3M 8210. When you order, name the exact model and the market it is certified for, and check the marking on the mask and its packaging before you accept the goods.
What about FFP1 and FFP3?
EN 149 has two more classes besides FFP2. FFP1 filters at least 80% and suits low-level dusts such as sweeping or general construction dust. FFP3 filters at least 99% and limits total inward leakage to 2% — the class used for fine toxic dusts, such as asbestos work, where the rules require it. The higher the class, the harder the mask is to breathe through, so do not default to FFP3 for ordinary dust: match the class to the hazard.
Do these masks protect against gases?
No. N95, FFP2 and KN95 masks filter particles only — dust, mist and fumes. They do nothing against gases or vapours such as solvents. For gas and vapour work you need a reusable half-mask respirator with the right gas cartridges — see our guide on choosing a half-mask respirator and filters.
Valved or unvalved?
An exhalation valve makes breathing easier and reduces heat and moisture build-up on long wear — the 3M 9322 Aura, for example, is a valved respirator. The trade-off is that a valve does not filter exhaled air, so valved masks are not suitable where source control matters, such as in sterile or clinical settings. For dusty industrial work, the valve is usually a comfort advantage.
How to spot a genuine mask
Check the markings on the mask itself: a NIOSH approval number (TC-84A-…) on an N95, a CE mark with a four-digit notified-body number on an FFP2, and the GB 2626-2019 standard number printed on a KN95. Buy from a traceable supplier and ask for the test report. And treat an unusually low price as a warning sign — counterfeit masks are common, and a mask that does not filter is worse than no mask at all, because it gives false confidence. Browse the range in our respiratory protection category or the 3M brand page.
Need a quotation? Tell us the product, the quantity and the destination country, and we will come back with a clear price. Send an inquiry or message us on WhatsApp.
Frequently asked questions
- Can I use an N95 mask instead of an FFP2 mask?
- No — buy the version certified for the market where the mask will be used. For the United States, ask for a NIOSH-approved N95; for the European Union, a CE-marked FFP2; for China, a GB 2626 KN95. Similar filtration does not make them interchangeable: the approval, the marking and the test method are all different.
- What are the filtration levels of N95, FFP2 and KN95?
- N95 filters at least 95% under NIOSH 42 CFR 84, FFP2 filters at least 94% under EN 149:2001+A1:2009, and KN95 filters at least 95% under GB 2626-2019. FFP2 also limits total inward leakage to no more than 8%.
- Do N95, FFP2 or KN95 masks protect against gases?
- No. N95, FFP2 and KN95 masks filter particles only — dust, mist and fumes. They do nothing against gases or vapours such as solvents. For gas and vapour work you need a reusable half-mask respirator with the right gas cartridges.
- What is the difference between FFP1, FFP2 and FFP3?
- FFP1 filters at least 80% and suits low-level dusts. FFP2 filters at least 94%. FFP3 filters at least 99% and limits total inward leakage to 2% — the class used for fine toxic dusts where the rules require it. The higher the class, the harder the mask is to breathe through, so match the class to the hazard rather than defaulting to FFP3.
